To Next Page

To Previous Page

Humidity ...........................................10 to 90% RH,

noncondensing

Maximum altitude............................. 2,000 m

Pollution degree ...............................2

Shock and Vibration

Operating shock (IEC 68-2-27)

cFP-TC-120

................................50 g, 3 ms half sine, 3 shocks;

30 g, 11 ms half sine,

3 shocks

Operating vibration, random (IEC 60068-2-34)

FP-TC-120.................................. 10–500 Hz, 2.2 g

rms

cFP-TC-120................................10–500 Hz, 5 g

rms

Operating vibration, sinusoidal (IEC 60068-2-6)

[c]FP-TC-120 .............................10–500 Hz, 5 g

Safety

The [c]FP-TC-120 meets the requirements of the following

standards for safety and electrical equipment for measurement,

control, and laboratory use:

• EN 61010-1, IEC 61010-1

• UL 3121-1

• CAN/CSA c22.2 no. 1010.1

Electromagnetic Compatibility

CE, C-Tick and FCC Part 15 (Class A) Compliant

Electrical emissions ..........................EN 55011 Class A at 10 m

FCC Part 15A above 1 GHz

Electrical immunity ..........................Evaluated to EN 61326:

1997/A1: 1998, Table 1

Note For full EMC compliance, you must operate this

device with shielded cabling. See the Declaration of

Conformity (DoC) for this product for any additional

regulatory compliance information. To obtain the DoC

for this product, click Declaration of Conformity at

ni.com/hardref.nsf/.

National Instruments CFP-TC-120 User Manual

Questions and Answers: