USER MANUAL
PXIe-8522/8523
4-port, 1000BASE-T1 and 100/1000BASE-T1 PXI Automotive
Ethernet Interface Modules
This document explains how to install and configure the PXIe-8522 and PXIe-8523
Automotive Ethernet interface modules.
Contents
Introduction...............................................................................................................................1
Getting Started.......................................................................................................................... 2
Installing the Module........................................................................................................ 2
Configuring the Module in MAX..................................................................................... 3
Connection Guidelines......................................................................................................4
Pinouts.......................................................................................................................................5
PXIe-8522 Pinout..............................................................................................................5
PXIe-8523 Pinout..............................................................................................................6
Port Modes................................................................................................................................ 6
Data Path Overview.......................................................................................................... 7
Direct Mode...................................................................................................................... 8
Tap Mode.......................................................................................................................... 9
PHY State................................................................................................................................10
Link Speed...............................................................................................................................11
Programming the Module........................................................................................................11
LED Functionality...................................................................................................................11
Synchronization Methods....................................................................................................... 12
Local Time...................................................................................................................... 12
Network Time................................................................................................................. 13
Host Time........................................................................................................................13
PXI Triggers....................................................................................................................13
Introduction
The PXIe-8522 and PXIe-8523 modules are 4-port, unshielded twisted pair (UTP) Automotive
Ethernet interfaces for developing applications with the NI-XNET driver. These modules are
ideal for developing applications that require Automotive Ethernet to test and validate
automotive electronic control units (ECUs).
The PXIe-8522 module is fixed at 1000BASE-T1. The PXIe-8523 module is configurable
between 100BASE-T1 and 1000BASE-T1.
To Next Page
Need help?
General
