© National Instruments Corporation A-1 PCI-MXI-2 for Linux
A
NI-VXI/NI-VISA Software
Overview
This appendix lists and describes the main programs and files that make up
the NI-VXI/NI-VISA software.
Main Programs and Files
This section lists the main programs and files that you can use for
controlling your VXI/VME interface.
Note Any executable not listed in this section is used by the driver and should not be
executed by the user directly.
•
resman is the National Instruments multiple-mainframe Resource
Manager.
•
vic is a graphical interactive control program. This program is
described in detail in the NI-VXI Graphical Utilities Reference
Manual.
•
victext is a text-based interactive control program with all the power
of
vic. This program is described in detail in the NI-VXI Text Utilities
Reference Manual.
•
vxiedit is a graphical VXI resource editor program. This program is
described in detail in the NI-VXI Graphical Utilities Reference
Manual.
•
vxitedit is the text-based VXI resource editor program. This
program is described in detail in the NI-VXI Text Utilities Reference
Manual.
•
vxiinit is the driver initialization program. Depending on the
version of the driver installed on your system, it may or may not be
present.
• The
README file contains the latest updates and corrections to the
manual when appropriate.
To Next Page
Loading...
Need help?
General
