© National Instruments | 1-31
NI cDAQ-9181/9184/9188/9191 User Manual
Cables and Accessories
Table 1-8 contains information about cables and accessories available for the cDAQ chassis. For
a complete list of cDAQ chassis accessories and ordering information, refer to the pricing
section of the cDAQ-9181/9184/9188/9191 product page at
ni.com.
Removing Modules from the cDAQ Chassis
Complete the following steps to remove a C Series module from the chassis.
1. Make sure that no I/O-side power is connected to the module. If the system is in a
nonhazardous location, the chassis power can be on when you remove modules.
2. Squeeze the latches on both sides of the module and pull the module out of the chassis.
Table 1-8. cDAQ Chassis Cables and Accessories
Accessory Part Number cDAQ Chassis
NI 9901 desktop mounting kit 779473-01 cDAQ-9184/9188
NI 9903 panel mount kit 781722-01 cDAQ-9181/9191
NI 9904 panel mount kit 779097-01 cDAQ-9184
NI 9905 panel mount kit 779558-01 cDAQ-9188
NI 9912 DIN rail mounting kit 779019-01 cDAQ-9184
NI 9913 DIN rail mounting kit 781740-01 cDAQ-9181/9191
NI 9915 DIN rail mounting kit 779018-01 cDAQ-9188
NI 9925 IP enclosure 781723-01 cDAQ-9181/9191
2-pos screw terminal kit for power
supply connection, qty 4
780702-01 All
CAT-5E Ethernet cable, shielded,
(2 m, 5 m, and 10 m lengths)
151733-02/05/10 All
To Next Page
Loading...
Need help?
General
