National Instruments NI ELVIS III User Manual

Note
■
You must use Internet Explorer to complete this step.
■
The IP address of the USB connection appears only aer you
install the Measurements Live Support Files.
3.
Click the Network Con󽘀guration button on the le
of the web page to display the Network Con󽘀guration page.
4.
In the Wireless Adapter wlan0 section, select Connect to wireless
network from the Wireless Mode pull-down menu.
5. Select the country in which you are located from the Country pull-down
menu. You must specify a country before you can select an available channel
for the wireless network.
6. Select the wireless network you want to join or select Other network if
you cannot find the wireless network from the Wireless Network pull-down
menu.
7.
Enter security settings for the wireless network that you select. You must
select Infrastructure from the Network Type pull-down menu because the
NI ELVIS III does not support Ad Hoc networks.
8. Select DHCP or Link Local from the Con󽘀gure IPv4 Address pull-down
menu. This option specifies that the NI ELVIS III automatically acquires an IP
address.
© National Instruments
13
NI ELVIS III Getting Started

National Instruments NI ELVIS III Specifications

General

Brand	National Instruments
Model	NI ELVIS III
Category	Network Hardware
Language	English