National Instruments PXIe-8822 User Manual

■
Save Changes and Reset—Any changes made to BIOS settings are stored
in NVRAM. The setup program then exits and reboots the controller. You also
can use the <F10> key to select this option.
■
Discard Changes—Any changes made to BIOS settings during this session
of the BIOS setup program are discarded. The BIOS setup continues to be
active.
■
Restore Factory Defaults—This option restores all BIOS settings to the
factory default. This option is useful if the controller exhibits unpredictable
behavior due to an incorrect or inappropriate BIOS setting. Notice that
any nondefault settings such as boot order, passwords, and so on also are
restored to their factory defaults. You also can use the <F9> key to select this
option.
■
Save As User Defaults—This option saves a copy of the current BIOS
settings as the User Defaults. This option is useful for preserving custom BIOS
setup configurations.
■
Restore User Defaults—This option restores all BIOS settings to the user
defaults. This option is useful for restoring previously preserved custom BIOS
setup configurations.
■
Boot Override—This option lists all possible bootable devices and allows
the user to override the Boot Option Priorities list for the current boot. If
no changes have been made to the BIOS setup options, the system continues
booting to the selected device without first rebooting. If BIOS setup options
have been changed and saved, a reboot is required and the boot override
selection is not valid.
Boot Options
The PXIe-8822/42/62 can boot from the following devices:
■
The internal drive.
■
A network PXE or iSCSI server on the same subnet.
■
An external USB mass storage device such as a USB hard drive, USB CD/
DVD-ROM, or USB flash drive.
■
Most PCI or PCI Express-based devices that provide a UEFI Option ROM.
ni.com
24
PXIe-8822/42/62 Getting Started

National Instruments PXIe-8822 Specifications

General

Brand	National Instruments
Model	PXIe-8822
Category	Computer Hardware
Language	English