PXIe-8822/42/62 Getting Started
Caution Using the PXIe-8822/42/62 controller in a manner not described
in this guide can impair the protection the controller provides.
Unpacking
The PXIe-8822/42/62 ships in an antistatic package to prevent electrostatic
discharge from damaging device components. To prevent such damage when
handling the device, ground yourself using a grounding strap or by holding a
grounded object, such as your computer chassis, and complete the following steps:
1.
Touch the antistatic package to a metal part of the chassis before removing
the device from the package.
Caution Never touch the exposed pins of connectors.
2.
Remove the device from the package and inspect the device for loose
components or any other sign of damage.
3. Notify NI if the device appears damaged in any way. Do not install a damaged
device into your chassis.
Installing the PXIe-8822/42/62 into a PXI Express
Chassis
To install the PXIe-8822/42/62 into a PXI Express chassis, complete the following
steps.
1.
Plug in your chassis before installing the PXIe-8822/42/62. The power cord
grounds the chassis and protects it from electrical damage while you install
the module.
© National Instruments
3
PXIe-8822/42/62 Getting Started
To Next Page
Loading...
Need help?
General
