IV. User Interface Navigation
This section provides basic instructions on navigating through the ALGO 3i screener’s software
interface and on entering infant data in the device. Detailed instructions on performing a screen
follow in Chapter V. ALGO 3i Screening Procedure.
Description of Keys
The ALGO 3i screener has an intuitive, icon-based user interface which is easy to navigate. The
device has six navigation buttons:
Up/Down arrow keys: These keys control the movement within the user interface, enabling the
user to move between and select from the available options presented in the display.
Toggle key: This large key enables up/down/left/right movements, and is primarily used to
scroll through the alphanumeric keypad to input data and passwords.
OK key: This green key controls the “YES”, “OK”, and “CONFIRM” functions, which allow a
command to be executed.
X key: This red key controls the “NO”, “STOP”, and “PAUSE” functions, which allow a
command to be stopped, screening to be paused, or allows the user to return directly to the
MainMenu.
? key: This key controls the Help system and will access the section of the ALGO 3i screener’s
help system corresponding to the area of the interface where the user is located. The user can
scroll through the Help system to access different information as desired.
The display will always indicate to the user which keys are used to select, scroll, advance to the
next window, or go back to the previous window.
Examples:
Go Back (to MainMenu) Advance (to DataManagement)
To Next Page
Loading...
Need help?
General
