English−24
To change the signal input, open the OSD menu by touching any of 5-direction-key. You can select the input signal at “Input
Select” under the “Extra”.
When selecting [Auto] input, the monitor selects the active signal input automatically.
HDCP is a system for preventing illegal copying of video data sent over a digital signal. If you are unable to view material via
the digital inputs, this does not necessarily mean that the monitor is not functioning properly. With the implementation of HDCP,
there may be cases in which certain content is protected by HDCP and might not be displayed due to the decision/intention of
the HDCP community (Digital Content Protection, LLC). HDCP video content is generally commercially produced Blu-rays and
DVDs, television broadcast, and streaming media services.
The power management function is an energy saving feature that automatically reduces the power consumption of the monitor
when the keyboard or the mouse has not been used for a xed period.
Maximum operation Blue Approx. 22 W (E224F)
Approx. 26 W (E244F)
Approx. 29 W (E274F)
All functions work.
Normal operation Blue Approx. 14 W*
1
(E224F)
Approx. 17 W*
1
(E244F)
Approx. 18 W*
1
(E274F)
Default setting.
Energy saving mode Amber 0.22 W*
1
(E224F, E244F)
0.25 W*
1
(E274F)
The monitor has passed a certain amount of time with no video
signal input.
Off mode Off 0.18 W*
1
(E224F, E244F)
0.21 W*
1
(E274F)
Turn off the monitor by the ⏻ key.
*
1
: Power consumption depends on the OSD menu setting or which devices are connected to the monitor.
This function works with computers that support VESA approved DPM (Display Power Management).
To Next Page
Loading...
Need help?
General