NEC MultiSync EA232WMI User Manual

English
English-11
Menu
Detects the level of ambient lighting allowing the monitor to make adjustments to various settings
resulting in a more comfortable viewing experience. Do not cover this sensor.
Opens OSD main menu.
Exits the OSD controls.
Exits to the OSD main menu.
Moves the highlighted area left/right to select control menus.
Moves the bar left/right to increase or decrease the adjustment.
Direct adjust of BRIGHTNESS if HOT KEY is set to ON.
Enters the OSD menu if HOT KEY is set to OFF.
Moves the highlighted area down/up to select one of the controls.
Direct adjust of VOLUME if HOT KEY is set to ON.
Enters the OSD menu if HOT KEY is set to OFF.
Enter the OSD sub menu. Active the selected function.
Change the Input source (No OSD condition).
Resets the highlighted control menu to the factory setting. Switches the ECO MODE (No OSD
condition).
Activates Auto Adjust function if pushed for 3 seconds (No OSD condition and Analog input only).
Turns the monitor on and off.
Button
1 Ambibright Sensor
2 MENU
3 4-Direction-Key Left/Right
Down/Up
4 SELECT
5 RESET/ECO MODE
6 Power
Controls
OSD (On-Screen Display) control buttons on the front of the monitor function
as follows:
To access OSD menu, press any of the control buttons (MENU, Left, Right, Down, Up).
To change signal input, press the SELECT button.
To change ECO MODE, press the RESET/ECO MODE button.
NOTE: OSD must be closed in order to change signal input.
NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the
RESET function by pressing the MENU button.
Brightness/Contrast Controls
BRIGHTNESS
Adjusts the overall image and background screen brightness.
If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear.
CONTRAST
Adjusts the image brightness in relation to the background.
AUTO CONTRAST (Analog input only)
Adjusts the image displayed to optimal settings.
ECO MODE
Decreases the power consumption by reducing the brightness level.
OFF: Sets brightness variable from 0% to 100%.
(ECO MODE) 1: Sets brightness variable range from 0% to 80%.
This setting can adjust brightness to a range in which power is reduced to meet Energy Star measurement
conditions.
(ECO MODE) 2: Sets brightness variable range from 0% to 40%.
This setting can adjust brightness to a range in which power is reduced by 40% compared to the maximum
brightness setting.
When this function is set to ON, a CARBON FOOTPRINT bar will appear alongside the brightness adjustment bar.
NOTE: This function is disabled when DV mode is set for Dynamic.
Up
Down
RightLeft

NEC MultiSync EA232WMI Specifications

General

3D	No
Aspect ratio	16:9
Response time	14 ms
Display surface	Matt
Display diagonal	23 \
Separate H/V sync	Yes
Display technology	LED
Vertical scan range	56 - 75 Hz
Horizontal scan range	31.5 - 83 kHz
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
USB hub version	2.0
HDMI ports quantity	0
USB Type-A downstream ports quantity	5
AC input voltage	100 - 240 V
Power consumption (standby)	0.47 W
Power consumption (typical)	28 W
Certification	CCC, CE, EuP, FCC Class B, EEA/Energy Label, ISO 9241-307 (pixel failure class I)
Product color	White
Market positioning	-
Panel mounting interface	100 x 100 mm
Storage temperature (T-T)	-10 - 60 °C
Storage relative humidity (H-H)	10 - 85 %
Operating relative humidity (H-H)	20 - 80 %
Maximum operating temperature range (T-T)	5 - 35 °C
Cables included	AC, Audio (3.5mm), DVI, USB, VGA
Sustainability certificates	EPEAT Silver, ENERGY STAR

Weight and Dimensions

Depth (with stand)	220 mm
Height (with stand)	379.1 mm
Weight (with stand)	7400 g
Depth (without stand)	71 mm
Width (without stand)	550 mm
Height (without stand)	329 mm
Weight (without stand)	4900 g