English−19
English
7. Turn on the monitor by pressing the key and then turn on the computer (Figure 7).
8. When using analog (VGA) input, No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial
setup. For further adjustments, use the following OSD controls:
• [AUTO CONTRAST]
• [AUTO ADJUST]
Refer to the “OSD Controls List” section of this User’s Manual for a full description of these OSD controls.
NOTE: If you have any problems please refer to the Troubleshooting section of this User’s Manual (see page 28).
Figure 7
Power key
Adjustable Stand with Pivot Capability
Hold the monitor on each side and adjust the screen position as desired.
For screen rotation (pivot), hold the monitor on each side, lift to its maximum height and turn it from landscape to portrait.
Tilt and Swivel
CAUTION:
Rotation, Raise and Lower
CAUTION: Please refer to “CAUTION 5”.
To Next Page
Loading...
Need help?
General