To Next Page

To Previous Page

English-11

English

Controls

OSD (On-Screen Display) control keys on the front of the monitor function

are as follows:

To access OSD menu, touch any of the control keys.

To change signal input, touch the SELECT key.

NOTE: Exit OSD in order to change signal input.

1 Ambient Light Sensor

Human Sensor

Detects the level of ambient lighting and the presence of a user, allowing the monitor to

make adjustments to various settings resulting in a more comfortable viewing experience.

Do not cover this sensor.

2 Power LED Indicates that the power is on or off.

3 Power Turns the monitor on and off.

4 INPUT/SELECT Enters the OSD menu. Enters OSD sub menus.

Changes the input source when not in the OSD menu.

5 MENU/EXIT Accesses OSD menu. Exits the OSD sub menu. Exits OSD menu.

6 LEFT/RIGHT Navigates to the left or right through the OSD menu.

You can adjust the BRIGHTNESS directly while the OSD menu is off*

7 UP/DOWN Navigates up or down through the OSD menu.

You can adjust the VOLUME directly while the OSD menu is off*

/RESET Resets the OSD controls back to factory settings.

Selects MULTI PICTURE when OSD menu is off*

When Hot Key function is OFF, this function is disabled.

MULTI PICTURE menu.

Touch the LEFT/RIGHT to select a priority (adjustable) screen of split screen. When MULTI PICTURE is OFF, a single screen

will be displayed.

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync EA275UHD-BK and is the answer not in the manual?

NEC MultiSync EA275UHD-BK Specifications

General