NEC MultiSync LCD1550V Service Manual

2-4
3.2 Factory mode
Mention the contents of the service menu letter
Warning message
How to enter Service mode
1. Open Information menu (Signal information)
2. Press “
3
”+”
4
”+”RESET”
3. Indicate warning message
4. Press Next then enter Service mode
Or Press EXIT to close OSM menu
OSM Flame is CYAN
How to use Service mode
Page1:
The page can check user’s HOURS RUNNING and system total’s HOURS RUNNING.
1. Press “NEXT” to move cursor on HOURS RUNNING.
2. Press “
3
(LEFT)” + “RESET” at the same time can check HOURS RUNNING.
3. Press “3 (LEFT)” or “4 (RIGHT)” to move cursor on FACTORY PRESET.
4. Press “RESET” + “4 (RIGHT)” can reset all function to initial (include user’s HOURS RUNNING
and AUTO INFORMATION).
Color of frame
Service: Cyan
All manuals and user guides at all-guides.com

NEC MultiSync LCD1550V Specifications

General

Brand	NEC
Model	MultiSync LCD1550V
Category	Monitor
Language	English