To Next Page

To Previous Page

English-19

English

Connecting a USB device

USB1: USB downstream port (Type-A).

Connect a USB compatible ﬂash memory or keyboard to Down Stream Port.

USB2: USB upstream port (Type-B).

Connect to a USB compatible computer with a USB cable.

A USB compatible computer connected to USB2 can control the devices connected to USB1.

USB CM1 (2A): Power supply port.

Please refer to the speciﬁcations page for power supply information (see page 72, page 73, page 74 and page 75).

USB CM2: Service port.

Please do not connect devices.

USB MP: USB downstream port (Type-A).

To use the Media Player function, please use this port.

• Pleasemakesuretheconnectorshapeandorientationis correctly aligned when connecting the USB device or cable.

• DependingontheuseofcomputerBIOS,OSordevice,theUSBfunctionmaynotbeworking.Inthiscase,pleasecheck

user’s manual of your computer or device, or contact your supplier for detailed information.

• BeforeturningoffthemainpowerswitchofthemonitororshuttingdownWindows

, please turn off the USB function and

remove the USB cable from the monitor. You may lose data when the computer crashes.

• ItmaytakeafewsecondsuntilthemonitorrecognizestheUSBinput.DonotdisconnecttheUSBcableordisconnect and

reconnect the USB cable before the monitor recognizes the input.

• You can set power supply for USB CM1 (2A) at USB POWER in the OSD menu (see page 44).

• When you use the USB CM1 (2A) port for power supply, please use a USB cable that supports 2A.

• Please refer to the USB in the OSD menu (See page 44) for the USB setting.

NOTE: USB CM1 (2A) and USB CM2 are not corresponding port.

Please refer to the connection (See page 17) to connect USB devices to the monitor.

CAUTION: Do not bind the USB cable. It may trap heat and start a ﬁre.

NEC MultiSync V654Q User Manual

Questions and Answers: