6
Your new appliance
In this section, you will find information on
■ the control panel
■ the operating modes
■ automatic calibration
Control panel
Pop-out operating knob
The rotary, temperature and operating mode selectors can all
be popped out. Push the required operating knob to pop it in or
out.
Control element Use/meaning
Operating mode selector Switching the appliance on and off
Selects the desired operating mode
Electronic clock
KJ
Clock function button Selects the clock function (see section: Electronic clock)
Rotary selector Makes settings within a clock function (see section: Electronic clock)
Symbols
Ì
Emptying the evaporator dish
If the symbol
Ì lights up: Remove the remaining water from the evaporator dish.
Í
Descaling
When the
Í symbol flashes, the appliance needs descaling
(see section: Descaling)
Î
Fill the water tank
When the symbol
Î lights up, fill the water tank or change the water in the water
tank (e.g. during descaling)
Temperature display (Basic settings)
±
Info button Press briefly: calls up additional information, for example the current temperature
during the heating up phase
Press and hold: calls up the Basic settings menu (see section: Changing the Basic
settings)
Temperature selector Sets the temperature
Changes the settings in the Basic settings menu (see section: Changing the Basic
settings)
Buttons
n
Programme button Set the programme or enter the weight (see section: Automatic programmes)
ƒ
Start button Starts operation
„
Stop button Short press: stops the operation (pause)
Press and hold: ends the operation
To Next Page
Loading...
Need help?
General
