NetComm NP127 User Manual

AC750 WiFi Extender - NP127
Step 2 of 2
Enter the wireless key and click the Finish button.
The NP127 connects to the router and after a moment, the NP127 displays that the
connection was successful.
Click the OK button. The connection wizard is complete. To access the NP127 user interface
in the future, connect an Ethernet cable to the Ethernet port on the NP127, then enter
http://my.extender into the address bar.
Access Point Mode
To use the NP127 in Access Point mode:
1. From the left side of the screen select the Set-up menu then select the
Mode Settings link.
2. Select AP mode then select Apply.

NetComm NP127 Specifications

General

Brand	NetComm
Model	NP127
Category	Extender
Language	English