NetComm Wireless Router NB504 User Manual

YML864 Rev1 NB504 User GuideNB504 User Guide
www.netcomm.com.au 75
5.12.5 Reboot
This page (shown in figure 5-57) allows you to reboot the router.
Figure 5-57 Reboot the router
Click the Reboot button to reboot the router.
Some settings of the router will take effect only after rebooting, which include:
• Change LAN IP Address. (System will reboot automatically)
• MAC Clone (system will reboot automatically)
• DHCP service function.
• Static address assignment of DHCP server.
• Web Service Port of the router.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router’s settings to factory default (system will reboot automatically).
5.12.6 Password
This page (shown in figure 5-58) allows you to change the factory default user name and password of the
router.
Figure 5-58 Password
It is recommended strongly that you change the factory default user name and password of the router. All
users who try to access the router’s web-based utility or Quick Setup will be prompted for the router’s user
name and password.
Note: The new user name and password must not exceed 14 characters in length and must not include any spaces. Enter the new
Password twice to confirm it.
Click the Save button when finished.
Click the Clear All button to clear all.

NetComm Wireless Router NB504 Specifications

General

Brand	NetComm
Model	Wireless Router NB504
Category	Wireless Router
Language	English