Manage Your Network
26
NETGEAR Wireless Cable Gateway
Gateway Status
Select Maintenance > Gateway Status to see hardware and firmware details about the
gateway and basic status information.
The following table describes the fields displayed in this screen.
Information:
Status:
Modem Status Field Description
Standard Specification
Compliant
DOCSIS 3.0
Hardware Version The hardware version of the gateway.
Software Version The version of firmware currently running on the gateway.
Cable MAC Address The MAC address used by the cable modem port of the gateway. This MAC
address may need to be registered with your cable service provider.
Device MAC address The MAC address used by the cable modem.
Cable Modem Serial number The serial number of the gateway hardware.
CM Certificate If the cable modem certificate is Installed, it is possible for the service provider to
upgrade your Data Over Cable service securely.
Modem Status Field Description
System Up Time Time since the last boot up.
Network Access Shows whether traffic can be forwarded from the LAN to the network
Cable Modem IP Address The current Internet IP address. If assigned dynamically and not connected to
the Internet, this field is blank.
To Next Page
Loading...
Need help?
General