NETGEAR GC110 Hardware Installation Guide

Figure 3. Back panel model GC110P
Table 1. Back panel components
DescriptionNumber
Cloud Connection LED (see LEDs on page 15).1a
Power LED (see LEDs on page 15).1b
PoE Max or Fault LED (see LEDs on page 15) for model GC110P only.1c
Recessed multi-function Reset button (see Multi-function Reset button on page 17).2
Model GC110. Eight independent 10/100/1000BASE-T RJ-45 ports, each with a left LED that
functions as the combined speed and activity LED (see LEDs on page 15). The right LED is
nonfunctioning.
Model GC110P. Eight independent 10/100/1000BASE-T RJ-45 PoE ports, each with a left LED
that functions as the combined speed and activity LED and a right LED that indicates the PoE status
(see LEDs on page 15).
3
Two dedicated Gigabit SFP fiber ports that can accept optional transceiver modules (see SFP
ports for fiber connectivity on page 16) with a single LED that functions as the combined link and
activity LED (see LEDs on page 15).
4
DC power receptacle for the DC power adapter that came in the switch package.5
Kensington lock for an optional security cable.6
Hardware Installation Guide14Hardware Overview
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries