NETGEAR GSS116E Hardware Installation Guide

Model GSS116E supports two IEEE 802.3ad static LAGs with a maximum of eight
members in each LAG. Model GSS108EPP supports two IEEE 802.3ad static LAGs with
a maximum of four members in each LAG.
In the following figure, ports 1 and 2 on model GSS116E are connected in a link
aggregation configuration to a ReadyNAS storage system.
Figure 8. Sample switch link aggregation between model GSS116E and a ReadyNAS storage system
For more information about link aggregation and LAGs, see the user manual, which you
can download from netgear.com/support/download/.
PoE applications (model GSS108EPP)
This section describes the PoE feature and applications of model GSS108EPP and
includes the following subsections:
• PoE overview (model GSS108EPP)
• Connect PoE equipment in a home (model GSS108EPP)
• Connect PoE equipment in a business environment (model GSS108EPP)
PoE overview (model GSS108EPP)
Model GSS108EPP supports four Power over Ethernet plus (PoE+) ports. The switch can
supply up to 30W PoE+ (IEEE 802.3at) to each port numbered 1 through 4 up to its total
maximum PoE power budget of 47W across all active PoE+ ports. The switch is also
compatible with PoE (IEEE 802.3af).
Supplied power is prioritized according to the port order, up to the total power budget
of the device. Port 1 receives the highest PoE priority, while port 4 is relegated to the
lowest PoE priority.
Hardware Installation Guide21Applications
8-Port and 16-Port Gigabit Ethernet (PoE+) Smart Managed Plus Click Switch

NETGEAR GSS116E Specifications

General

Brand	NETGEAR
Model	GSS116E
Category	Switch
Language	English