Need help?Do you have a question about the NETGEAR GS748T and is the answer not in the manual?
General| Basic switching RJ-45 Ethernet ports quantity | 48 |
|---|---|
| MAC address table | 16000 entries |
| Packet buffer memory | 1.632 MB |
| Maximum data transfer rate | 1 Gbit/s |
| Latency | 20 µs |
| I/O ports | 48 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink on all ports) 4 SFP slots for fiber Gigabit Ethernet modules |
| Dimensions (WxDxH) | 440 x 260 x 43 mm |
| Power requirements | 100-240VAC 50/60 Hz |
| Networking features | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Connectivity technology | Wired |
| Full duplex | Yes |
| Networking standards | IEEE 802.3x |
| Minimum system requirements | Category 5 network cables Network card for each PC Network software (e.g., Windows) |
| Mean time between failures (MTBF) | 69930 h |
| Safety | UL listed (UL 1950)/cUL, IEC950/EN60950 |
| LED indicators | Link, Power |
| Power consumption (typical) | 70 W |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Weight | 4000 g |
|---|
To Next Page