EasyManuals Logo
Home>NETGEAR>Switch>GS748T

NETGEAR GS748T User Manual

NETGEAR GS748T
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
120
GS748T Smart Switch
Multicast Router VLAN Configuration
This page configures the interface to only forward the snooped IGMP packets that come from
the specified VLAN to the multicast router attached to this interface. The configuration is not
needed most of the time since the switch will automatically detect the presence of a multicast
router and forward IGMP packets accordingly. It is only needed when you want to make sure
that the multicast router always receives IGMP packets from the switch in a complex network.
To access the Multicast Router VLAN Configuration page, click Sw
itching Multicast IGMP
Snooping
Multicast Router VLAN Configuration.
To configure the multicast router VLAN settings:
1. Select the check box associated with
each interface you want to configure. Select the
check box in the heading row to apply the same settings to all interfaces.
2. Use VL
AN ID to select the VLAN ID for which the Multicast Router Mode is to be Enabled or
Disabled.
3. Use Mu
lticast Router to enable or disable multicast router for the VLAN ID.
4. Click APPL
Y to update the switch with the changes.
5. Click CA
NCEL to abandon the changes.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS748T and is the answer not in the manual?

NETGEAR GS748T Specifications

General IconGeneral
Basic switching RJ-45 Ethernet ports quantity48
MAC address table16000 entries
Packet buffer memory1.632 MB
Maximum data transfer rate1 Gbit/s
Latency20 µs
I/O ports48 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink on all ports) 4 SFP slots for fiber Gigabit Ethernet modules
Dimensions (WxDxH)440 x 260 x 43 mm
Power requirements100-240VAC 50/60 Hz
Networking features10BASE-T, 100BASE-TX, 1000BASE-T
Connectivity technologyWired
Full duplexYes
Networking standardsIEEE 802.3x
Minimum system requirementsCategory 5 network cables Network card for each PC Network software (e.g., Windows)
Mean time between failures (MTBF)69930 h
SafetyUL listed (UL 1950)/cUL, IEC950/EN60950
LED indicatorsLink, Power
Power consumption (typical)70 W
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight4000 g

Related product manuals