Table 4. Factory default settings for the router (Continued)
Default SettingFeature
Disabled (except traffic on port 80,
the HTTP port)
Inbound (communications coming
in from the Internet)
Firewall
Enabled (all)Outbound (communications going
out to the Internet)
DisabledSource MAC filtering
EnabledWiFi communicationWiFi
See router labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
1
Transmission speed
United States in the US; otherwise,
varies by region
Country/region
2.4GHz front and back haul: Auto
5 GHz front haul:
•
Channel 48 for NA, PR,AU, CA,
and TW
•
Channel 36 for EU, KO, JP, and
IN
5 GHz back haul:
•
Channel 157 for NA, PR, AU, CA,
and TW
•
Channel 108 for EU, KO, JP, and
IN
RF channel
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
Factory settings for Orbi router model RBR40
The following table shows the factory default settings for the router.
User Manual143Supplemental information
Orbi WiFi System
To Next Page
General
