Enable or disable implicit beamforming
Beamforming shapes a directional WiFi signal aimed at a WiFi client based on the client’s
location, as opposed to radiating the signal out in all directions. This feature improves
WiFi range and performance. Clients do not need to support beamforming to benefit
from implicit beamforming.
To enable or disable implicit beamforming:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. Select or clear the Enable Implicit BEAMFORMING check box.
Selecting this check box enables implicit beamforming. Clearing this check box
disables implicit beamforming.
6. Click the Apply button.
Your settings are saved.
If you connected over WiFi to the network, you are disconnected from the network
and must reconnect.
Enable or disable airtime fairness
Airtime fairness ensures that all WiFi clients receive equal time on the network. Network
resources are divided by time, so if you have five WiFi clients, they each get one-fifth
of the network time. The advantage of this feature is that your slowest WiFi clients don’t
control network responsiveness. This feature is enabled by default, but you can disable
it.
User Manual80Manage Network Settings
4-Stream AX1800 WiFi 6 Router Model RAX15
To Next Page
Loading...
Need help?
General
