Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
6-6 Advanced Configuration
202-10090-01, April 2005
• Incoming (Response) Port Range - enter the range of port numbers used by the remote system
when it responds to the PC's request.
Modifying or Deleting an existing Rule:
• Select the desired rule by clicking the radio button beside the rule.
• Click Edit or Delete as desired.
• Checking Operation and Status
Rules Status
To see which rules are currently being used, click the Status button. The following data will be
displayed:
• Rule - the name of the Rule.
• LAN IP Address - The IP address of the PC currently using this rule.
• Open Ports - the Incoming ports which are associated the this rule. Incoming traffic using one
of these ports will be sent to the IP address above.
• Time Remaining - The time remaining before this rule is released, and thus available for other
PCs. This timer is restarted whenever incoming or outgoing traffic is received.
To Next Page
Loading...
Need help?
General
