Neuton CE 5.2 User Manual

22 1-866-NEUTON1 (638-8661) www.neutonowners.com
Neuton CE 5.2 Product Specifications
Motor
RPM 4300
Tip Speed 16,000 ft./min.
AMP Idle 4 – 5
AMP Cutting 8 – 10
Size 500W, 24V DC/32 Amp
Noise Under 80 Decibels
Controls
Start/Stop Safety Control Bar
Shape Ergonomically Designed
Key Removable Safety Key w/Circuit Breaker
Electric System Electro-mechanical Relay
Housing
Material Injected Polypropylene
Handlebar Height Adjustment
(at lowest housing height setting) 35" - 37"
Wheels, Front 7" x 1.6", Molded Rubber Tread
Wheels, Rear 8" x 1.9", Molded Rubber Tread
Weight 48 lbs. (including Battery)
33 lbs. (without Battery)
Housing Length 30"
Housing Width 18"
Housing Height 12.5"
Cutting
Cutting Deck Width 14.2"
Blade 14" Aero Blade
Blade Nut Torque 16.6 ft-lbs.
Cutting Height Adjustable from 1.2 - 3.0 inches
Discharge Chute Included
Bagger Included
Bagger Capacity 1 Bushel (1.26 cubic ft.)
Mulching Plug Included
Trimming Optional Attachment
Battery
Voltage 24V DC
AMP 10 Amp-Hour
Type Sealed, Lead/Acid
Weight 15 lbs.
Approximate Run Time 45 - 60 minutes for fully charged Battery
Battery Charger Included. 24Volt Charger, plugs into standard electrical outlet
Charge Time 12 – 24 Hours
Meets CPSC Mower Safety Standards

Neuton CE 5.2 Specifications

General

Brand	Neuton
Model	CE 5.2
Category	Lawn Mower
Language	English