4 - OPERATING INSTRUCTIONS
Power Take Off (PTO) - Operation - Cab
Rear PTO
To engage the rear PTO:
1. Push the PTO switch (1) down and turn the switch to
the "ON" position (A).
NOTE: When the PTO switch is in the engaged “ON”
position, the PTO indicator light (2) illuminates on the
instrument panel.
2. The PTO system is independent of the tractor ground
speed, and the operator can perform the following
operations:
•
The tractor ground travel can stop without stopping the
PTO.
•
Stop the PTO by disengaging the PTO clutch without
stopping the tractor ground travel.
To disengage the rear PTO:
1. Push down on the PTO switch (1) and the switch will
automatically return to the "OFF" position (B).
NHIL15CT00592AA 1
NHIL16CT00387FA 2
Mid PTO
To engage the mid PTO:
1. Pull up on the mid PTO lever (1)
2. Push down on the PTO switch (2) and turn the switch
to the "ON" position (A).
NOTE: When the mid PTO is engaged the rear PTO will
also be engaged. The mid PTO cannot be engaged sep-
arately.
To disengage mid PTO:
1. Push down on the PTO switch (2) and the switch will
automatically return to the "OFF" position (B).
2. Push the mid PTO lever down to the "OFF" position
(1).
NOTE: To start the engine the mid PTO lever must be in
the down (disengaged) position and the PTO switch in the
"OFF" position.
NHIL13CT01248AA 3
NHIL15CT00592AA 4
4-13
To Next Page
Need help?
General
