To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if the engine does not start in New Holland E26C Excavators?
If your New Holland Excavator's engine isn't starting, possible causes include a low fuel level, so add fuel; air leaking in the fuel system; a defect or damage in the fuel injection pump or in the nozzle; incorrect valve clearance; or incorrect engine compression pressure.
Why does the engine oil pressure light appear when raising the engine speed on New Holland E26C?
The engine oil pressure light might appear due to several reasons: the oil level may be low, so add oil to the specified level; the oil filter may be clogged, in which case replace the oil filter cartridge; there may be oil leaks, so check the correct tightening torque of pipes and joints; or there could be a defect in the cluster.
General| Brand | New Holland |
|---|---|
| Model | E26C |
| Category | Excavators |
| Language | English |
Explains DANGER, WARNING, CAUTION, and NOTICE to convey hazard levels.
Emphasizes safety precautions when working near buried utility lines.
General safety guidelines for machine operation, maintenance, and handling.
Procedures for starting the machine, including anti-theft protection.
Step-by-step procedure for safely starting the machine's engine.
Critical safety and operational guidance for working on inclined surfaces.
Procedures for safely shutting down the machine's engine.
Instructions and precautions for safely moving the machine.
Step-by-step guide for safely parking the machine.
Procedure for safely loading the machine onto a transport trailer.
Instructions for securing the machine with tie-downs for safe transport.
General safety and procedural guidelines for performing maintenance tasks.
Schedule of maintenance actions based on operating hours and type of service.
Procedure for replacing engine oil and the oil filter.
