Nexo GEOM1210-I User Manual

GEOM12 – ACCESSORIES
Page 10 / 20 GEOM1210-I - GEOM1220-I
GEOM12 – ACCESSORIES
WARNINGS
All GEOM12 accessories are specifically rated in agreement with structural computations.
Never use other accessories – including push-pins – when assembling GEOM12 cabinets than the ones provided by NEXO:
NEXO will decline responsibility over the entire GEOM12 accessory range if any component is purchased from different
supplier.
All GEOM12 accessories have been designed so that cabinet are arrayed vertically.
GEOM12 horizontal assemblies as shown in figure below are UNSAFE and STRICTLY PROHIBITED
VNI-BUMPM12 / VNT-BUMPM12
Rated for a maximum of 12 GEOM12 or 8 MSUB18, or a
combination with a maximum of 4 MSUB18 and 6 GEOM12.
Flown on 2 rigging points with retractable rings.
Usable with VNT-EXBARM12 for extra tilt angle and flown on
one or two rigging points.
Ground stack assembly alone, or with VNT-GSTKM10M12S /
VNT-GSTKM10M12L for adding stability.
2 locations for laser/clinometer (VNT-BUMPM12 only).
VNT-EXBARM12

Nexo GEOM1210-I Specifications

General

Brand	Nexo
Model	GEOM1210-I
Category	Stereo System
Language	English