Saving tips
Your heat pump installation produces heat and hot water. This occurs via the
control settings you made.
Factors that affect the energy consumption are, for example, indoor temper-
ature, hot water consumption, the insulation level of the house and whether
the house has many large window surfaces. The position of the house, e.g.
wind exposure is also an affecting factor.
Also remember:
႑
During the adjustment period (winter time) all thermostat valves should
be fully open. The heat pump's heating settings are then adjusted so that
the correct indoor temperature is obtained, in most rooms, regardless of
the outdoor temperature. In rooms where a lower temperature is required,
the thermostat valves are lowered to the desired level. After a few months,
the remaining thermostats can be lowered slightly to avoid an increase
of the room temperature due to solar radiation, stove heat etc. Further
reductions may be required later on.
႑
You can lower the temperature when away from the house by scheduling
"holiday setting" in menu 4.7. See page 65 for instructions.
႑
You can reduce the ventilation speed when you are away by scheduling
in menu 1.3.3. See page 36 for instructions.
႑
If you activate "Hot water Economy", less energy is used.
Power consumption
Energiförbrukning fördelat över året
0%
5%
10%
15%
20%
25%
jan feb mars april maj juni juli aug sep okt nov dec
Månad
)V DSSUR[LPDWH
HQHUJ\ FRQVXPSWLRQ VSUHDG DFURVV WKH \HDU
0RQWK
-DQ )HE 0DU $SULO 0D\ -XQH -XO\ $XJ 6HS 2FW 1RY 'HF
RI DQQXDO
FRQVXPSWLRQ
Increasing the indoor temperature one degree increases power consumption
by approx. 5%.
27NIBE™ F750Chapter 2 | The heat pump – the heart of the house
To Next Page
Loading...
Need help?
General
