Nice Pop User Manual

2
Warnings:
This manual has been especially written for use by quali-
fied fitters. The information provided in this manual is of no
use to end users!
This manual refers to the POA1 control unit and must not be
used for any other products.
The POA1 control unit has been designed to control electromechanical
actuators for automated swing gates or doors; any other use is consid-
ered improper and is consequently forbidden by the laws currently in
force. Do not install the unit before you have read all the instructions at
least once.
!
Table of contents: page
1 Product description 3
2 Installation 3
2.1 Typical system layout 3
2.2 Preliminary checks 4
2.3 Electrical connections 4
2.3.1 Electrical diagram 4
2.3.2 Description of the connections 5
2.3.3 Notes about connections 5
2.3.4 STOP type input 6
2.3.5 Examples of photocell connections without the 6
photo-test function
2.3.6 Examples of photocell connections with the 7
phototest function.
2.3.7 Checking the connections 8
2.4 Automatic search system for the limit switches 8
3 Testing 9
4 Diagnostics 9
5 Pre-set functions 9
page
6 Programmable functions 9
6.1 Direct programming 9
6.2 Level one programming, part one 10
6.3 Level one programming, part two 10
6.4 Level two functions 10
7 Programming 11
7.1 Programming methods 11
7.1.1 Level one programming: functions 12
7.1.2 Level two programming: parameters 12
7.2 Memory deletion 13
7.3 Example of level one programming 13
7.4 Example of level two programming 13
7.5 Programming diagram 14
8 Optional accessories 15
9 Servicing the POA1 control unit 15
9.1 Disposal 15
10 What to do if… 15
11 Technical characteristics 16
Annex Radio receiver 17
POA1

Nice Pop Specifications

General

Brand	Nice
Model	Pop
Category	Gate Opener
Language	English