To Next Page

To Previous Page

11) Technical specifications

Power input : POA1 Control unit ➔ 230Vac ±10% 50÷60Hz

: POA1/V1 Control unit ➔ 120Vac ±10% 50÷60Hz

Max. absorbed power : 170 VA

Emergency Electricity supply : for PS124 buffer batteries

Maximum motor current : 3A with a “level 6” current sensitivity cut in)

Service power output : 24Vdc 200mA maximum current (the voltage can range from 16 to 33Vdc)

Phototest output : maximum current 24Vdc 100mA (the voltage can range from 16 to 33Vdc)

Flashing lamp output : for flashing lamp 24Vdc, maximum power 25W (the voltage can range from 16 to 33Vdc)

Gate open indicator output : for indicator lamps at 24Vdc maximum power 5W (the voltage can range from 16 to 33Vdc)

or electric locks 12Vac 25W

STOP Input : for NC contacts or constant resistance 8,2KΩ +/- 25%

Working time : automatic detection

Pause time : programmable at 5, 10, 20, 40, 80 seconds

Pre-flashing time : programmable at 2, 4, 6, 8, 10 seconds

Leaf delay in open cycle : programmable at 5, 10, 20, 30 and 40 % of working time

Leaf delay in close cycle : Automatic detection

2nd motor output : for POP PP7224 motors

Maximum cable lengths : electricity supply 30m

: 2nd motor 15m

: other inputs/outputs 50m

: aerial 10m

Operating temperature : -20÷50°C

Nice Pop User Manual

Other manuals for Nice Pop