125
t
If there is not enough space available on
the memory card to record three
images, the exposure-count display in
the monitor will flash.
Shooting can
begin when a new memory card is
inserted.
ADL bracketing: The first shot after bracketing is activated is
taken with Active D-Lighting off, the second at the current
Active D-Lighting setting (0 110; if Active D-Lighting is off,
the second shot will be taken with Active D-Lighting set to
Auto).
In continuous release mode, shooting will pause after each
bracketing cycle.
If the camera is turned off before all shots in the
bracketing sequence have been taken, bracketing will resume
from the next shot in the sequence when the camera is turned on.
A The Bracketing Progress Indicator
During AE bracketing, progress is shown by
the bracketing indicator in the information
display:
• : Camera ready to take first
shot.
• : Camera ready to take second
shot.
• : Camera ready to take third shot.
During ADL bracketing, the setting that will be
used for the next shot is underlined in the
information display.
To Next Page
Loading...
Need help?
General
