105
Advanced Camera Settings – The Set-up Menu
You can set the button sound on/off and select the volume of shutter and
start-up sounds.
The monitor turns off automatically and the camera enters Standby mode to
save power if no operations are performed for a specified length of time. You
can select thirty seconds (30s), one minute (1m, default setting), five minutes
(5m) or thirty minutes (30m). If no operations are performed in Standby
mode for another three minutes, the camera will turn off automatically.
Sound Settings
h
Button sound
When On is selected, a beep will sound once when operations are
completed successfully, three times when an error is detected.
Shutter sound
Set the volume of the shutter sound to Loud, Normal or Off.
Start-up sound
Set the volume of the sound played when the camera is turned on
to Loud, Normal or Off.
Auto Off
i
For more information, see “Auto Off” (P.149).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
