86
General Camera Setup
General Camera Setup
The Setup Menu
The following settings can be changed in the setup
menu by selecting the z tab.
Press the d button M z (setup) tab (A10)
Option Description
A
Welcome screen
Allows you to select the image displayed as the welcome
screen when the camera is turned on. Select COOLPIX to
display the COOLPIX logo. Select Select an image to use
an image captured with the camera as the welcome
screen.
E49
Time zone and
date
Allows you to set settings related to the camera’s date and
time. The Time zone setting allows you to specify the time
zone where the camera is mainly used and whether or not
daylight saving time is in effect. When the travel
destination (x) is selected, the camera automatically
calculates the time difference between the travel
destination and the home time zone (w), and saves
images using the date and time of the travel destination.
E50
Monitor settings
Allows you to select whether or not to display information
on the shooting screen and playback screen. If you select
Framing grid+auto info, a grid is displayed when
shooting to help you frame the shot. The default setting is
Auto info.
You can also change the image review setting or the
monitor brightness.
E53
Print date
Allows you to imprint the shooting date and time on
images at the time of shooting. The default setting is Off.
• The date cannot be imprinted in the following
situations:
- When using Panorama assist scene mode
- When recording movies
E55
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Motion detection
AF assist
Vibration reduction
To Next Page
Loading...
Need help?
General
