92
Shooting Options: The Shooting Menu
Shooting, Playback, and Setup Menus
Preset Manual
Preset manual is used with mixed lighting or to compensate for light sources
with a strong color cast (for example, to make pictures taken under a lamp
with a red shade look as though they had been taken under white light).
1 Place a white or gray reference object under the lighting that
will be used during shooting.
2 Use the rotary multi selector to choose
[f Preset manual] in the white balance
menu, and press d.
The camera zooms in.
3 Choose [Measure].
To apply the most recently measured value for preset
manual, choose [Cancel] and press d.
4 Frame the reference object.
5 Press d.
The shutter is released and the new white balance value is set.
No pictures are recorded.
k Note on Preset Manual
Regardless of the flash mode selected, the flash will not fire when d is pressed in step 5.
Therefore, the camera cannot measure a value for preset manual for when the flash is used.
White balance
Exit
Auto
Daylight
Auto
Daylight
Incandescent
Fluorescent
Preset manual
Incandescent
Fluorescent
Preset manual
Exit
Measure
Cancel
Exit
Measure
Cancel
Preset manual
Reference object frame
To Next Page
Loading...
Need help?
General
