23
Step 1 Turn the Camera On and Select A (Auto) Mode
Basic Photography and Playback: A (Auto) Mode
Indicators Displayed in A (Auto) Mode
• The indicators and photo info displayed during shooting and playback will turn
off after a few seconds (A 127).
• When the monitor has turned off in standby mode to save power, press the
following button to reactivate it (A 133).
- Power switch, the shutter-release button, A button, or b (movie-record)
button
D Functions Available in A (Auto) Mode
• The flash mode (A 30) can be adjusted, the self-timer (A 32), macro mode (A 33), and the
exposure compensation (A 34) can be applied.
• Press the d button to specify settings for all shooting menu items (A 36) according to
shooting conditions.
D Vibration Reduction and Motion Detection
• See Vibration reduction (A 129) or Motion detection (A 130) in the setup menu (A 120)
for more information.
• Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.
8
Shooting mode
A displayed in A
(auto) mode.
Image mode
The combination of image
quality (compression) and image
size is displayed. The default
setting is k 4320 × 3240.
Internal memory indicator
Indicates that images will be stored on the
camera’s internal memory (approximately 32 MB).
When a memory card is inserted in the camera, C
does not appear and images will be stored on the
memory card.
Movie options
A movie option is displayed
for movie recording (A 103).
Pressing the b (movie-record)
button enables to start movie
recording (A 100).
Vibration reduction icon
Vibration reduction can be
applied to reduce the effects
of camera shake.
Motion detection icon
The effects of the subject
movement and camera
shake are reduced.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
