65
Viewing Pictures on a Computer
5
More on Playback
4. Disconnecting the Camera
Make sure that the power-on lamp on the camera lights green before
disconnecting the camera.
If PTP is selected in the USB menu
(61), you can turn the camera off
once transfer is complete.
If you have not changed the USB option in the camera setup menu from
its default setting of Mass Storage, you must remove the camera from
the system as shown below before turning the camera off.
Windows XP Home Edition/Windows XP Professional:
Click the “Safely Remove Hardware” icon in the taskbar
and select Safely remove USB Mass Storage Device
from the menu that appears.
Windows 2000 Professional:
Click the “Unplug or Eject Hardware” icon in the taskbar
and select Stop USB Mass Storage Device from the
menu that appears.
Windows Millennium Edition (Me):
Click the “Unplug or Eject Hardware” icon in the taskbar
and select Stop USB Disk from the menu that appears.
Windows 98 Second Edition (SE):
In My Computer, click with the right mouse button on
the removable disk corresponding to the camera and se-
lect Eject from the menu that appears.
Mac OS X
Drag the “NO_NAME” camera volume to the Trash.
Mac OS 9
Drag the “untitled” camera volume to the Trash.
• If you turn the camera off, the color of the power-on lamp on the camera will
change from green to red and will start blinking as the battery is being charged.
• When the battery is fully charged, the power-on lamp will stop blinking and re-
main red.
Mac
OS X
Mac
OS 9
To Next Page
Loading...
Need help?
General
