Nikon Eclipse E400 User Manual

— Photomicrography
@
Refer
to
the
instructions
of the
photomicrographic
equipment
being
used
for
detailed
information
on
the
assembly
method
and
photomicrographic procedure.
O Selecting an eyepiece tube
:
A
trinocular
eyepiece
tube
equipped
with
a
vertical
tube
is
used.
There
are
two
types
of
trinocular
eyepiece
tubes.
Select
the
tube according to the purpose of use.
Operating
the
optical
path
selection
lever
changes
the
amount
of
light
entering
the
binocular
part
and
vertical
tube
of
the
eyepiece tube as shown below.
F eyepiece tube
T eyepiece tube
Light proportion
Lever
Binocular
Vertical
Light
proportion
position
part
tube
Lever
Binocular
Vertical
me
position
part
tube
FAD
Bino---@Mioo
:
O
~
FF RS 2 : 80
o y dg 2) 0 : 100
EMİ
poro;
3)0
:
100
EX
bo
ir;
m
BINO PHOTO
1-1 Vertical tube adapter
A photo vertical tube adapter is provided to the trinocular
eyepiece
tube
as
standard
equipment.
It
allows
a
photomicrographic
equipment
to
be
installed.
To
install
the
photo
vertical
tube
adapter,
insert
it
into
the
vertical
3
screws
tube
and
tighten
three
clamp
screws
on
the
vertical
tube
around
using
the
hexagonal
screwdriver
provided.
Replace
the
photo
tube
adapter
with
the
TV
vertical
tube
adapter
(sold
separately) in the case of using a TV camera.
1-2
Release
of
T
and
F
eyepiece
tubes
lever
clicking
“NO
CLICK”
switch
is
used
for
minimizing
slight
vibrations
produced
by
operation
of
the
optical
path
selection
lever.
This
switch
is
equipped
on
the
bottom
(installation)
surface
of
the
eyepiece
tube.
Turn
the
switch
in
the
arrow
direction
using
the
hexagonal
screwdriver
provided,
and
the
“NO
CLICK”
will
become
effective
to
remove
the
clicking
action
of
the
optical
path
selection lever.

Nikon Eclipse E400 Specifications

General

Brand	Nikon
Model	Eclipse E400
Category	Microscope
Language	English