113112
Custom Setting Menu
Custom Setting Menu
Function
Automatic film rewind at the end of film
roll
Reset to DX film speed setting for new
film
Bracketing order
On-Demand Grid Lines superimposition
display
Illumination for superimposition
Focus area selection
Auto Exposure Lock when shutter release
button is lightly pressed
Auto film loading when camera back is
closed
Closest-subject-priority Dynamic AF in
Single Servo AF
Closest-subject-priority Dynamic AF in
Continuous Servo AF
AE-L/AF-L button
Options
0: Activated (initial setting)
1: Disabled
0: Activated (initial setting)
1: Disabled
0: Metered value, under, over (initial
setting)
1: Under, metered value, over
0: Not displayed (initial setting)
1: Displayed
0: Automatically illuminated for low light
(initial setting)
1: Cancelled
2 : Always illuminated
0: Normal selection (initial setting)
1: Enables successive rotation of focus
area selection
0: Disabled (initial setting)
1: Activated
0: Enabled (initial setting)
1: Disabled
0: Enabled (initial setting)
1: Disabled
0: Disabled (initial setting)
1: Enabled
0: AE/AF simultaneous lock (initial setting)
1: Auto Exposure lock only
2: Autofocus lock only
3: Auto Exposure lock (remains locked
until button is pressed again)
4: AF operation only starts by pressing AE-
L/AF-L button
1
2
3
4
5
6
7
8
9
10
11
Function
Command Dial functions
Film rewind
Multiple exposure
Time delay for auto meter-switch-off
Self-timer duration
LCD illuminates by pressing any function
button
AF-Assist Illuminator activation
ISO film speed setting for data imprint
between frames
Options
0: Main-Command Dial for shutter speed;
Sub-Command Dial for aperture setting
(initial setting)
1: Main-Command Dial for aperture; Sub-
Command Dial for shutter speed setting
0: High-speed film rewind (initial setting)
1: Quiet film rewind
0: Single shutter release operation (initial
setting)
1: Continuous shutter release operation
4 : 4 sec.
6 : 6 sec. (initial setting)
8 : 8 sec.
16 : 16 sec.
2 : 2 sec.
5 : 5 sec.
10 : 10 sec. (initial setting)
20 : 20 sec.
0: Disabled (initial setting)
1: Activated
0: Activated (initial setting)
1: Disabled
0 : Automatically (initial setting)
1 : Under ISO 25
2 : ISO 32-80
3 : ISO 100
4 : ISO 125-200
5 : Over ISO 250
12
13
14
15
16
17
18
19
To create Custom Setting: Set the exposure mode/Custom Setting dial to ·.
Rotate the Main-Command Dial to select menu number and rotate the Sub-
Command Dial to select desired option number. See pages 70-75 for details.
Miscellaneous
F80 (E)-Thailand 02.12.27 5:21 PM Page 112