Nikon N75 User Manual

2
3
Turn the power switch off and mount the lens to the camera
body.
• Position lens in the camera's bayonet mount so that the mounting indexes on lens
and camera body are aligned, then twist lens anticlockwise until it locks into
place.
(Be sure not to touch the lens release button.)
•
Wit h CPU Ni kko r lens wi th aperture ring (other than G-type), set th e lens
a
pertur e to its minimum and lock. When the lens is not set to its minimum
aperture setting and the power switch
is turned on , FE E blinks in the LCD panel
and viewfinder and the shutter cannot be
re leased.
Detach the lens.
• Push and hold the lens release button, then
turn the lens clockwise
to detach the lens.
When came ra is left unattended without lens
When you leave the camera unattended without a lens attached, be sure to attach
the supplied body cap (page
2), or optional body cap BF-1A. (BF-1 body cap cannot
be used.)
19
I
IE

Nikon N75 Specifications

General

Type	35mm SLR
Lens Mount	Nikon F mount
Flash Sync Speed	1/90 sec
Autofocus	Yes
Focus	TTL phase detection
Viewfinder Coverage	89%
Exposure Modes	Program, Shutter-priority, Aperture-priority, Manual
Metering	Matrix, Center-weighted, Spot
ISO Range	25 - 5000
Flash	Built-in flash, TTL flash control
Viewfinder	Pentamirror
Focusing Screen	Fixed
Battery	2x CR2
Weight	380 g (without batteries)
Shutter Speed Range	30 - 1/2000 sec