Chapter 8 Specifications
96
3
Physical Properties
Stereo microscopes SMZ800N/SMZ1270/SMZ1270i
Operating conditions Temperature: 0°C to +40°C
Humidity: 60% RH max. at 40°C (no condensation)
Altitude: 2,000 m max.
Pollution level: Degree 2
Overvoltage Category: Category II
Electrical shock protection class (AC Adapter): Class I
Indoor use only
Transport/
storage conditions
Temperature: -20°C to +60°C
Humidity: 90% RH max. (no condensation)
External dimensions
(W x H x L) and
mass (reference)
Dimensions and mass vary depending on the composition described in Chapter 1, “Components.”
SMZ800N Zooming Body system: 292 mm x 376 mm x 387 mm, approx. 5.5 kg
SMZ1270 Zooming Body system: 300 mm x 402 mm x 420 mm, approx. 6.5 kg
Safety Standards CE Marking
IVD Directive
This equipment complies with the emission and immunity requirements of
IEC/EN 61326-2-6.
Low Voltage Directive
EMC Directive
C-UL-US Listed
FCC Part 15 Subpart B Class A
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
CAN ICES-003(A) / NMB-003(A)
Australian EMI (AS/NZS CISPR11)
AC Adapter
Model name 3-AC AC Adapter(Model name by the
manufacturer: FSP040-RHAN2)
C-AC AC Adapter (Model name by the manufacturer:
PW-120A2-1Y240G)
Operating environment Temperature: 0°C to +40°C
Humidity: 10 to 90% RH (no condensation)
Altitude: 5,000 m max.
Pollution level: Degree 2
Overvoltage Category: Category II
Electrical shock protection class: Class I
Indoor use only
Temperature: 0°C to +40°C
Humidity: 10 to 90% RH (no condensation)
Altitude: 5,000 m max.
Pollution level: Degree 2
Overvoltage Category: Category II
Electrical shock protection class: Class I
Indoor use only
Storage environment Temperature: -20°C to +75°C
Humidity: 5 to 95% RH (no condensation)
Temperature: -20°C to +85°C
Humidity: 10 to 90% RH (no condensation)
External dimensions 110 (L) x 50 (W) x 32 (H) mm 170 (L) x 64.8 (W) x 38.5 (H) mm
Mass (reference) Approx. 210 g (without the power cord) Approx. 650 g (without the power cord)
Safety standards CE marking, GS mark, C-UL-US Listed,
PSE mark
CE marking, GS mark, C-UL-US Listed,
PSE mark