Nilfisk-ALTO MC 3C Service Manual

F
SM MC 3C_ MC 4M Ver.1.0_March 2015
Service / Repair
47
Bearings and wobble disc disassembling
Disassemble the bearing track and bearing
Dismount the wobble disc by loosen the
screw in the center, AND holding the
wobble disc with puller arm (1206150) as
shown on the above picture.
Wobble disc, bearing and bearing track
MC 3C
Oil seals can be installed by using a 13 mm
box spanner. Check that the box spanner
fits exactly on the oil seal.
Oil seals asassembly

Nilfisk-ALTO MC 3C Specifications

General

Brand	Nilfisk-ALTO
Model	MC 3C
Category	Pressure Washer
Language	English