Nilfisk-ALTO MC 4M Service Manual

F
SM MC 3C_ MC 4M Ver.1.0_March 2015
Service / Repair
45
Pull out the cylinder head
Cylinder head and oil seals disassembling
Lift up the cylinder head
Disassemble the 4 cylinder block bolts with
a 6 mm Allen key box spanner.
Lift the cylinder block up.
Pull out the 3 oil seals from the cylinder
block. (Use e.g. a Bahco Puller type 4521 N
-F. Bahco puller (not shown) for puller is
type 4524 G)
MC 3C

Nilfisk-ALTO MC 4M Specifications

General

Brand	Nilfisk-ALTO
Model	MC 4M
Category	Pressure Washer
Language	English