9
1-877-646-5288
NOTE: Nutri Ninja
®
| Ninja Blender Duo with Auto-iQ
®
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)
9 Press the power button to turn on the unit. Select
the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by holding
the Auto-iQ Pulse button until your desired consistency
is reached.
NOTE: Max PULSE iteration is 30 Pulses. After 30
Pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 Pulses.
10 To pause the appliance, press the selected speed or
Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
11 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)
12 Turn the pitcher anticlockwise to remove and then lift
off the base. (Fig. 9)
Assembly and Use for the Ninja
®
Blender - cont.
CAUTION: Never insert your hands in the pitcher as the
blades are sharp. Always use a spatula to dislodge
food that has stuck to the sides of the pitcher.
CAUTION: The blades are not locked in place. If
using the pour spout, ensure that the lid is fully
locked onto the blender pitcher.
CAUTION: If pouring with the lid removed, ALWAYS
remove the blade assembly first before pouring.
13 Depending on the consistency of the contents in the
container, open the pour spout cap and use the spout
to empty liquid contents.
14 For thicker consistencies, remove the lid and blade
attachment carefully (by its shaft), then empty contents
from the container. To remove the lid, press the release
button on the lid and pull the lid handle up to a 90°
angle and lift the lid off the blender pitcher. (Fig. 10)
15 Make sure that the unit is unplugged when not in use.
16 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you. (Fig. 11)
Fig. 8
USE REMOVAL
AUTO
Fig. 6
Fig. 9Fig. 7 Fig. 10 Fig. 11
WARNING: Never leave the appliance unattended while in use.
CAUTION: Stacked Blades are sharp, not locked in place and removable, handle with care. When handling
the Stacked Blades, always hold them by the shaft.
IMPORTANT: Make sure that the motor base is plugged in for use.
To Next Page
Loading...
Need help?
General
