18
www.sharkninjamanual s.com
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before
inserting or removing any attachment and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Use caution when handling the blade
assemblies as the blades are very sharp.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
NOTE: The Stainless Steel Ninja
®
Cup is NOT
dishwasher safe.
3 Place the lids, pitcher, bowl, Nutri Ninja
®
cups, discs,
feed chute, jar, grinder and blade assemblies in the
dishwasher. Place the lids and attachments on the
toprack.
OR
4 Carefully hand wash the lids, pitcher, bowl, Nutri
Ninja cups, discs, feed chute, jar, grinder and blade
assemblies in warm, soapy water with a soft cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1 Store the Nutri Ninja | Ninja Blender Duo with Auto-iQ
®
Technology upright with the pitcher on the motor base,
Stacked Blade assembly inside the pitcher and lid
locked on the pitcher. Do not place anything on top.
Store the Food Processor Bowl with the chopping blade
inside and lid on top and the Nutri Ninja cup with the
rest of the attachments along side the appliance or in
a cabinet where they will not be damaged and won’t
cause a hazard.
Be sure to store the grinder with lid
attached.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja | Ninja Blender Duo with Auto-iQ
Technology features a safety system which prevents
damage to the unit’s motor and drive system should you
inadvertently overload your appliance. If the appliance
is being overloaded, the motor will stop. Allow
the appliance to cool for approximately 15
minutes. To reset the appliance, follow the resetting
procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the blades or attachments.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
To Next Page
Loading...
Need help?
General
