EasyManuals Logo
Home>Ninja>Blender>BL64X series

Ninja BL64X series User Manual

Ninja BL64X series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
13
1-877-646-5288
Assembly and Use for the Mini Prep Bowl
USING THE MINI PREP BOWL
NOTE: The mini prep bowl must be used with the
flat food processor lid.
1 Place the 1.8 L bowl onto the motor base.
2 Holding the spindle by the shaft, place it onto the gear
shaft inside the 1.8 L bowl. Ensure that the attachment
fits around the gear shaft and that it is standing
straight. (Fig. 1)
3 Place the mini prep bowl aligning the spindle inside the
center post. (Fig. 2)
4 Hold the Mini Prep Bowl Blade by the shaft and carefully
place it over the center post of the mini prep bowl. (Fig. 3)
5 Add ingredients into the mini prep bowl.
6 Holding the lid by the handle in the upright position, place
it on top of the 1.8 L bowl aligning the arrow ( ) located
on the lid with the arrow ( ) located on the bowl’s handle.
(Fig. 4) Press the handle down until you hear a click.
7 Plug the power cord into the electrical outlet and press
on the power button ( ).
8 Select the speed that best suits your needs. For best
results, hold the Auto-iQ
®
Pulse button down until you
have reached your desired consistency. (Fig. 5)
NOTE: Max PULSE iteration is 30 Pulses. After 30
Pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 Pulses.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
9 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Mini Prep Bowl Blade to stop turning.
10 To remove the lid, pull the lid handle up to a 90° angle
and lift the lid off. (Fig. 6)
11 Carefully hold the Mini Prep Bowl Blade by the shaft
and lift it out of the mini prep bowl. (Fig. 7)
12 Turn the bowl anticlockwise and then lift off the base.
CAUTION: If pouring from the bowl, ALWAYS remove
the Mini Prep Bowl Blade first before pouring.
ASSEMBLY USE REMOVAL
Fig. 1
Fig. 4
Fig. 2
Fig. 3
Fig. 5
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
A
UTO
AU
T
O
AUTO
A
UTO
BLEND
A
UTO
BLAST
Fig. 6
Fig. 7
WARNING: Never leave the appliance unattended while in use.
CAUTION: Mini Prep Bowl Blade is sharp, not locked in place and removable, handle with care. When
handling the Mini Prep Bowl Blade, always hold by the shaft.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ninja BL64X series and is the answer not in the manual?

Ninja BL64X series Specifications

General IconGeneral
BrandNinja
ModelBL64X series
CategoryBlender
LanguageEnglish

Related product manuals