11
1-877-646-5288
Assembly and Use for the Ninja
®
Processor Bowl - cont.
REMOVAL
USEUSE
Fig. 2 Fig. 3
Fig. 5
Fig. 1
USING THE CHOPPING BLADE
1 Holding the Chopping Blade assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the attachment fits around the gear shaft and that it is
standing straight.
2 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
3 Plug the power cord into the electrical outlet and press
on the power button ( ).
4 Select the speed or Auto-iQ
®
program that best suits
your needs. Pulse ingredients for even chopping by
holding the Auto-iQ Pulse button until your desired
consistency is reached.
NOTE: Max PULSE iteration is 30 Pulses. After 30
Pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 Pulses.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
5 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
6 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
7 Turn the bowl anticlockwise and lift it to remove it from
the motor base. (Fig. 3)
CAUTION: The blades are not locked in place. If
pouring from the bowl, ALWAYS remove the blade
assembly first before pouring.
8 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you. (Fig. 4)
USING THE DOUGH BLADE
1 Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing
straight. (Fig. 5)
2 Add the ingredients and secure the bowl lid onto the
bowl.
3 Plug the power cord into the electrical outlet and press
on the power button (
). Select the LOW/DOUGH
button and process until ingredients come together to
form a mass.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
4 Once finished making dough, stop the appliance by
pressing the power button (
) and wait for the blade to
stop turning.
5 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
6 Turn the bowl anticlockwise and lift it to remove it from
the motor base. (Fig. 3)
7 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
Fig. 4
WARNING: Never leave the appliance unattended while in use.
CAUTION: Chopping Blade is sharp, not locked in place and removable, handle with care. When handling
the Chopping Blade, always hold by the shaft.
To Next Page
Loading...
Need help?
General
