Ninja BL771 series User Manual

15
TOLL FREE: 1-877-646-5288
HOW TO CLEAN
CAUTION: Make sure that the motor base
is unplugged from the power source before
inserting or removing any attachment and
before cleaning.
CAUTION: DO NOT immerse the motor base
into water or any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and
wipe dry.
3 Place the pitcher, single serve cup and bowl in
the dishwasher. Place the lids and attachments
on the top rack. Usecautionwhenhandling
thebladeassembliesasthebladesare
verysharp.
NOTE: You may also wash the containers by
filling ¾ of the container with warm water and
a drop of dish washing detergent, placing the
corresponding lid on the container and pressing
the pulse button a few times. Once clean,
remove the container from the motor base.
Rinse the container, attachment and lid under
running water. Allow all the parts to dry before
storing.
Please call customer service if any servicing
needs to be performed on the appliance at
1-877-646-5288.
Care&Maintenance
HOW TO STORE
1 Store the Ninja
®
Mega Kitchen System
™
upright
with the pitcher on the motor base, 6-Blade
assembly inside the pitcher and lid on the pitcher.
Do not place anything on top. Store the bowl with
the 4-Blade assembly inside and the lid on top.
S tore the single serve cup and the rest of the
attachments along side the appliance or in a
cabinet where they will not be damaged and
won’t cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja
®
Mega Kitchen System
™
features a
unique safety system which prevents damage
to the unit’s motor and drive system should you
inadvertently overload your appliance. If the
appliance is being overloaded, the motor will stop
and the power light will remain lit and speeds 1, 2
and 3 will flash. To reset the appliance, follow the
resetting procedure below:
1 Unplug the appliance from the electrical
outlet.
2 Remove and empty the container and ensure
that no food is jamming the cutting blades or
attachments.
3 Allow the appliance to cool for approximately
15 minutes.
4 Re-install the container onto the base and re-
plug the appliance into the electrical outlet.
5 Proceed to use the appliance as before
making sure not to exceed the recommended
maximum capacities.
BL771_30_BL771C_30_IB_ENG_121206_6.indd 15 12-12-06 11:23 AM

Ninja BL771 series Specifications

General

Brand	Ninja
Model	BL771 series
Category	Food Processor
Language	English