TIP: If the blade assembly
is not fully seated, you will
not be able to install and
lock the lid into position.
NOTE:
DO NOT
add
ingredients before installing
the blade assembly.
NOTE: For best results,
follow recipe loading
instructions.
TIP: For best results when
processing hard or tough
ingredients such as raw
meat, baking chocolate,
or hard cheese in the
Precision Processor bowl,
cut ingredients into 1”
cubes and process no
more than 1 cup at a time.
USING YOUR PRECISION PROCESSOR
™
BOWL
IMPORTANT: Review all
warnings on pages 3–5
before proceeding.
1
Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Ensure the motor base is
connected to power.
2 Lower the Precision
Processor Bowl onto the
motor base.
3 Rotate Precision
Processor
™
Bowl
clockwise until it clicks into
place.
4 Exercising care, grasp the
Chopping Blade Assembly
by the top of the shaft
and place it onto the drive
gear inside the bowl. Note
that the Chopping Blade
Assembly will fit loosely
onto the drive gear.
5 Add ingredients to the
bowl, making sure not to
exceed the max liquid and
max fill lines.
To Next Page
Loading...
Need help?
General
